To do this, you should prepare the following tools:

[shapanwwuom]

Otherwise, a clogged filter will inevitably lead to a breakdown of the drain pump, and then you will have to buy and install a new one;
Problem with turning on the washing machine. Usually, devices do not turn on if there is no power supply. That is, one of the possible reasons for the phenomenon may be knocked out fuses or banal forgetfulness. So, you need to plug the wire into the socket or choose the right automatic protection. But it is also possible that the Samsung control unit does not work and needs to be repaired;
Increased noise and knocking of the machine. If similar symptoms suddenly appear, then there is a malfunction in the mechanism. This happens if there is a foreign object inside the tank. Another possible cause may be uneven distribution of laundry inside the drum. Other causes of malfunction include defective bearings or improperly installed machine.
How to disassemble a washing machine?
To ensure the repair of a Samsung machine, it is necessary to make the mechanism of the device accessible, that is, to disassemble it first.

Phillips screwdriver or screwdriver;
flat head screwdriver;
pliers;
hammer;
8 mm spanner and Allen key;
nippers.
First, remove the top panel. Using a Phillips screwdriver, unscrew singapore telegram data the screws located under the top panel on the back of the Samsung machine.

Then we lift the back part of the panel a little, and with the other hand we help to move the panel towards us.

The next step is to remove the detergent drawer located on the front panel.

To do this, pull out the tray and use a Phillips screwdriver to unscrew the screws on the sides. Disconnect the tray.

Now it will be easier to remove the Samsung control panel.

It is convenient to do this in this way: with one hand, hold the control panel on the right side, with the other hand, carefully and gradually move the left side of the panel towards you, unhooking it from the mounting fastener.